DOT3 Brake Fluid
- Oxidation and corrosion resistance, high temperature stability, low temperature fluidity
- Standards compliant with DOT 3, 49CFR 571.116 and FMVSS 116, SAE-J1703


Information
Size | US Item # | CAN Item # | SDS Doc |
---|---|---|---|
12oz | 800001968 | ||
32oz | 800001968 |
Directions
- 800001968 - 12oz
Clean the top of the master cylinder reservoir and remove the fill cap.
Add fluid to the level specified by manufacturer and replace fill cap.
- Follow vehicle manufacturer’s recommendations when adding brake fluid or servicing brake system.
- Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
- Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture.
- Caution: Do not refill container and do not use for other liquids.
- Note: If spilled on paint surface, rinse immediately with water. Do not rub or wipe area.
- 800001968 - 32oz
Clean the top of the master cylinder reservoir and remove the fill cap.
Add fluid to the level specified by manufacturer and replace fill cap.
- Follow vehicle manufacturer’s recommendations when adding brake fluid or servicing brake system.
- Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
- Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture.
- Caution: Do not refill container and do not use for other liquids.
- Note: If spilled on paint surface, rinse immediately with water. Do not rub or wipe area.
