Line 1 Line 2
  • NeedNeed Help?

    Have questions or comments about Gumout® products? Send us an email or call our toll-free number.

  • SOLUTION FINDER NAVSOLUTION FINDER

    Not sure what product is right for you? Use our easy to use the product finder to select the best products for your need.

  • askAsk the Expert

    Your answers to frequently asked questions about Gumout® products and their use. If the answer to your performance additives question isn't below, contact us by email or by phone.

Mass Airflow Sensor Cleaner

Gumout® Professional Formula Mass Air Flow Sensor Cleaner safely cleans gas and diesel MAF Sensors restoring sensor functionality and engine performance. Overtime, dirt, pollen, oil and other contaminates build up on the MAF Sensor which leads to poor sensor performance. A clean Mass Air Flow (MAF) Sensor is instrumental in ensuring the optimal air-to-fuel ratio is delivered to the engine. To maintain optimal functionality, clean the MAF sensor when the vehicle’s air filter is serviced/replaced.

BUY IT NOW FIND GREAT DEALS
540028_007-a_GO_Pro-FoamIVTC_11oz_ecomm
540041_007-a_GO_ProMass_11oz_ecomm
Prev Next

QUICK BUY

Mass Airflow Sensor Cleaner

Mass Airflow Sensor Cleaner Size: 11oz: US Item #: 540041
  • O Reilly

What it Does

RESTORE
RESTORE

Restores Fuel Economy

IMPROVES
IMPROVES

Improves Throttle Response & Acceleration

ELIMINATES
ELIMINATES

Eliminates Rough Idle

MAXIMIZES
MAXIMIZES

Maximizes Horsepower

CORRECT RATION
CORRECT RATION

Establishes Correct Air/Fuel Ratio

SAVE
SAVE

Plastic Save, Proven formula will not damage sensitive MAF Sensors

Gumout

Information

Size US Item # CAN Item # SDS Doc
11oz 540041 N/A |US
WARNING

WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Directions

  • 540041 - 11oz

    Before beginning, ensure vehicle is off and the engine is cool.

    1. Locate Mass Air Flow Sensor (MAF); located between the air box and throttle body.
    2. Disconnect the MAF wiring harness.
    3. Remove the MAF housing.
    4. Place a towel underneath the MAF to catch cleaner runoff.
    5. With provided tube attached, spray 10-15 bursts of Gumout® Professional Mass Air Flow Sensor Cleaner to the inside of the MAF. DO NOT allow the tube or any other object to touch the hot wire except the cleaning fluid (if applicable).
    6. Spray all sides of the MAF, including the housing,
      connectors, and terminals.
    7. Allow the MAF to dry completely before reassembly.
    8. To maintain vehicle performance, clean MAF sensor with Gumout® Professional Mass Air Flow Sensor Cleaner every time the air filter is changed.

     

    Do NOT apply to vehicles with a Karman-Vortex Air Flow Sensor, e.g., Toyota Supra Turbo, Mitsubishi’s and most Lexus vehicles

KEEP VEHICLE PREFORMING AT ITS BEST

YOU MAY WANT TO TRY

Maximize Fuel Economy

  • Regane® Complete Fuel System Cleaner Regane® High Mileage Fuel System Cleaner All-In-One® Complete Fuel System Cleaner + Ethanol Treatment

WHERE TO BUY

FIND OUR PRODUCTS AT THESE GREAT LOCATIONS

Gumout
gumout.com

Mass Airflow Sensor Cleaner

Maximize Fuel Economy

Gumout® Professional Formula Mass Air Flow Sensor Cleaner safely cleans gas and diesel MAF Sensors restoring sensor functionality and engine performance. Overtime, dirt, pollen, oil and other contaminates build up on the MAF Sensor which leads to poor sensor performance. A clean Mass Air Flow (MAF) Sensor is instrumental in ensuring the optimal air-to-fuel ratio is delivered to the engine. To maintain optimal functionality, clean the MAF sensor when the vehicle’s air filter is serviced/replaced.

540041_007-a_GO_ProMass_11oz_ecomm

Information

Size US Item # CAN Item #
11oz 540041 N/A
WARNING

WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Directions

  • 540041 - 11oz

    Before beginning, ensure vehicle is off and the engine is cool.

    1. Locate Mass Air Flow Sensor (MAF); located between the air box and throttle body.
    2. Disconnect the MAF wiring harness.
    3. Remove the MAF housing.
    4. Place a towel underneath the MAF to catch cleaner runoff.
    5. With provided tube attached, spray 10-15 bursts of Gumout® Professional Mass Air Flow Sensor Cleaner to the inside of the MAF. DO NOT allow the tube or any other object to touch the hot wire except the cleaning fluid (if applicable).
    6. Spray all sides of the MAF, including the housing,
      connectors, and terminals.
    7. Allow the MAF to dry completely before reassembly.
    8. To maintain vehicle performance, clean MAF sensor with Gumout® Professional Mass Air Flow Sensor Cleaner every time the air filter is changed.

     

    Do NOT apply to vehicles with a Karman-Vortex Air Flow Sensor, e.g., Toyota Supra Turbo, Mitsubishi’s and most Lexus vehicles

Consumer Questions and Comments: Phone: 855-888-1990 (Toll Free)
Fax: 8 55-888-1991
© 2020 Gumout. All rights reserved.